Marine Fast Drying Alkyd Resin Anti Corrosion Coating for Hardware Paint

Product Detail

Fast Dry Waterborne Alkyd Resin WQ-WL310




Features:

? Good storage stability,no ease to hydrolyze;

? Environmentfriendly product,VOC of less than 7%;

? Fast dry,and excellent gloss;

? This product contains drier,so it is unnecessary to add drier during paint preparation;

? Excellent shear stability,and can directly use for pigment paste grinding;

? Excellent anti-corrosivity,and good initial water resistance;

? The finished product paint has good versatility and good in-can appearance,and can replace oil based alkyd anti-rust paint,alkyd ready mixed paint,alkyd enamel,etc




Technical Index:

Product Type:fast dry modified alkyd resin

Emulsion Composition:Water based alkyd resin,cosolvent,neutralizer,water

Viscosity:500-1000mPa.s

Non-Volatile Matters:42±2%(GB/T 1725)

PH value:8.0-10.5

Appearance:white to light brown emulsion

TVOC:=5%(g/L)




Instructions:

1. This product has excellent shear stability,and can directly be used for pigment paste grinding.

2. Water based drier has been added to this water based alkyd emulsion.The drier consumption is 5%-1%of solid content of the emulsion.

3. It has good compatibility with other water based emulsions.

4. This product can be directly grinded with pigments and fillers,but it is necessary to perform the compatibility test because different acidic or basic pigment fillers may be used.

5. It has excellent rust resistance in the primer,especially under action of antirust pigment.The best filler is talc powder or kaolin.Calcium carbonate is avoided.

6. The finished product paint must be stored under alkaline condition,at pH between 7.5 and 8.5.The pH value can be adjusted by ammonia water,triethylamine or N,N dimethyl ethanolamine(DMEA).

7. Before use,the product can be diluted by deionized water.Tap water can also be used after passing the test.

8. This product has high gloss and anti-corrosion performance,and can be used for preparation of enamel,mixed paint and antirust primer.




Storage

The product should be stored in a cool place below 38?,and protected from freezing in winter.Its shelf life is 6 months,and the expired products still can be used if passing the inspection




Varnish Basic Properties

Item	Test resullt	Reference value	Standard
Non-Volatile Matters	40%	=40%	GB/T 1725-2007
Surface Drying Time	20-30 min	=5h	GB/T 1728-1979
Hard Drying Time	22h	=10h	GB/T 1728-1979
Pencil Hardness(7days)	B-HB	--	GB/T 1730-1993
Gloss,60o	101	--	GB/T 1743-2007
50 cm impact(7days)	Passed	--	GB/T 1732-1993
Flexibility	1 mm	--	GB/T 1732-1993
Adhesion(Cross-cut tape test)	Grade 0	--	GB/T 1720-1993
Water Resistance	18h,slightly white,able to recover	18h,normal	GB/T 1733-1993
120 Solvent Oil Resistance	168h,normal	4h,normal	GB/T 1934-1993






Other Product:

product name	non- volatile	PH	viscosity(mPa.s)	specific gravity	properties	application
WQ-WL310	42±2	8-10	300-800	1.03±0.01	low VOC, dry quickly,good salt fog-spray resistance	a general alkyd resin for ready mixed paint and antirust paint
WQ-AK337	38±2	8-10	200-1000	1.01±0.01	dry quickly, high hardness,low cost	a general alkyd resin for ready mixed paint and antirust paint
WQ-AK375	77±2	/	70-170*	1.07±0.01	high gloss, high fullness,low cost	alkyd amino-baking coatings


Packing Details:









Certificate&Honor